High Temperature Buffered & Hybrid
The DEKORON®/Unitherm™ High temperature buffered self regulating heater bundles are designed to provide freeze protection at a low ambient of -20°F when the maximum continuous core temperature exceeds 250°F with the heater power on. By adjusting the insulation between the heated core and the self regulating heating element, freeze protection of process tubes with operating at up to 1,100°F can be achieved. In addition Dekoron Unitherm’s Composite traced bundle is uniquely constructed to handle the requirements of superheated steam analyzer applications. The hybrid superheat section transitions seamlessly into a more traditional bundle design to handle the steam after it has lost its superheat and begins to condense. This section is designed with a self-regulating heating element, thermal insulation and an extruded outer jacket. This section is smaller and much more flexible than a conventional 1100°F bundle. The heaters are electrically connected, so only one electrical feed point is required.
Data Sheets
High Temperature Buffered Electric Traced Tubing Bundles
Bundles with Constant Wattage (CPD) Heaters
- 2252/2262 Series Fibrous Glass Insulation – Imperial Tubing Sizes
- 2252/2262 Series Fibrous Glass Insulation – Metric Tubing Sizes
Bundles with High Temperature SR Heaters
- 2256/2266 Series Fibrous Glass Insulation – Imperial Tubing Sizes
- 2256/2266 Series Fibrous Glass Insulation – Metric Tubing Sizes
Composite High Temperature Hybrid Electric Traced Tubing Bundles
Custom SR/MI Composite Heat Traced Bundle
- Composite High Temperature Steam Analyzer Bundle Fibrous Glass Insulation
- Composite High Temperature Steam Analyzer Bundle Aerogel Insulation
High Temperature Electric Traced Tubing Bundles using MI Heater
Bundles with integral Mineral Insulated Heaters
Bundles with carrier tube for field insertion of MI Heater
- 2C82/3/4 Series Carrier Tube Bundles with Imperial Size Process Tube
- 2C82/3/4 Series Carrier Tube Bundles with Metric Size Process Tube
Accessories
Dekoron Unitherm has a full line of accessories for Electric Traced Tubing Bundles.
Technical Bulletins
- What tubing material must I use to meet ASTM standards
- Stainless Steel Tubing – ASTM A269 or ASTM A213
- Can I use thermistors to control temperature
- What is the tolerance on Heated Hose length
- Can I install Dekoron Unitherm bundles below grade
- Common stainless steel grades used in Dekoron Unitherm bundles
- What is Dual Certified Stainless Steel
- Application and Installation of Dekron Line Sensing Thermostats
- What type temperature controller is needed for a bundle with a CPD heater
- What CPD heaters are used in Dekoron Unitherm bundles
- Polymer Jackets on Dekoron Unitherm Products
- Constant Power Density Heating Element
- Fittings for Dekoron-Unitherm Bundles
- Dekoron Unitherm Video Training Ch 1 – Sealing
- Dekoron Unitherm Video Training Ch 2 – Electrical Power Connnection and Termination
- Dekoron Unitherm Video Training Ch 3 – Bending Tube Bundles
- Dekoron Unitherm Video Training Ch 4 – Routing and Supporting
- Dekoron Unitherm Video Training Ch 5 – Testing and Commissioning