2201-2204 Steam Trace

2201-2204 Steam Trace

2201-2204 Steam Trace

Dekoron/Unitherm Models 2201 through 2204 steam traced tubing bundles are designed to maintain fluid temperature or viscosity in process lines using saturated steam. These products contain single or multiple metal or polymer process tubes and a metal steam tracer tube covered with a heat reflecting foil, moisture resistant, non-wicking, inorganic fibrous glass thermal insulation and a seamless weather protective outer jacket. The tubes are cabled to provide solid contact and consistent heat transfer throughout the bundle length. The cabled tubes are easily bent in any direction. There is no need to twist the bundle to make a bend, a necessity with parallel-tube bundles. The compact, energy efficient design keeps the outer jacket at or below 140°F (60°C) while transporting fluids at temperatures up to 400°F (204°C).

Datasheets Accessories Installation Sheets Technical Bulletins

Please register or log in

To have access to the complete information and specs about our products, please register a new account or make sure to log in.

Preview our Technical Bulletins

  • What tubing material must I use to meet ASTM standards

  • Stainless Steel Tubing - ASTM A269 or ASTM A213

  • Can I use thermistors to control temperature

  • What is the tolerance on Heated Hose length

  • Can I install Dekoron Unitherm bundles below grade

  • Common stainless steel grades used in Dekoron Unitherm bundles

  • What is Dual Certified Stainless Steel

  • Application and Installation of Dekron Line Sensing Thermostats

  • What type temperature controller is needed for a bundle with a CPD heater

  • What CPD heaters are used in Dekoron Unitherm bundles

  • Polymer Jackets on Dekoron Unitherm Products

  • Constant Power Density Heating Element

  • Fittings for Dekoron-Unitherm Bundles

  • Dekoron Unitherm Video Training Ch 1 - Sealing

  • Dekoron Unitherm Video Training Ch 2 - Electrical Power Connnection and Termination

  • Dekoron Unitherm Video Training Ch 3 - Bending Tube Bundles

  • Dekoron Unitherm Video Training Ch 4 - Routing and Supporting

  • Dekoron Unitherm Video Training Ch 5 - Testing and Commissioning