High Temperature Buffered & Hybrid
High Temperature Buffered & Hybrid
The DEKORON®/Unitherm™ High temperature buffered self regulating heater bundles are designed to provide freeze protection at a low ambient of -20°F when the maximum continuous core temperature exceeds 250°F with the heater power on. By adjusting the insulation between the heated core and the self regulating heating element, freeze protection of process tubes with operating at up to 1,100°F can be achieved. In addition Dekoron Unitherm’s Composite traced bundle is uniquely constructed to handle the requirements of superheated steam analyzer applications. The hybrid superheat section transitions seamlessly into a more traditional bundle design to handle the steam after it has lost its superheat and begins to condense. This section is designed with a self-regulating heating element, thermal insulation and an extruded outer jacket. This section is smaller and much more flexible than a conventional 1100°F bundle. The heaters are electrically connected, so only one electrical feed point is required.
-
Bundles with Constant Wattage (CPD) Heaters
-
Bundles with Low Temperature SR Headers
-
Custom SR/MI Composite Heat Traced Bundle
Composite High Temperature Steam Analyzer Bundle Fibrous Glass Insulation
Composite High Temperature Steam Analyzer Bundle Aerogel Insulation
-
Bundles with integral Mineral Insulated Heaters
-
Bundles with carrier tube for field insertion of MI Heater
2C82/3/4 Series Carrier Tube Bundles with Imperial Size Process Tube
2C82/3/4 Series Carrier Tube Bundles with Metric Size Process Tube
Please register or log in
To have access to the complete information and specs about our products, please register a new account or make sure to log in.
Preview our Technical Bulletins
What tubing material must I use to meet ASTM standards
Stainless Steel Tubing - ASTM A269 or ASTM A213
Can I use thermistors to control temperature
What is the tolerance on Heated Hose length
Can I install Dekoron Unitherm bundles below grade
Common stainless steel grades used in Dekoron Unitherm bundles
What is Dual Certified Stainless Steel
Application and Installation of Dekron Line Sensing Thermostats
What type temperature controller is needed for a bundle with a CPD heater
What CPD heaters are used in Dekoron Unitherm bundles
Polymer Jackets on Dekoron Unitherm Products
Constant Power Density Heating Element
Fittings for Dekoron-Unitherm Bundles
Dekoron Unitherm Video Training Ch 1 - Sealing
Dekoron Unitherm Video Training Ch 2 - Electrical Power Connnection and Termination
Dekoron Unitherm Video Training Ch 3 - Bending Tube Bundles
Dekoron Unitherm Video Training Ch 4 - Routing and Supporting
Dekoron Unitherm Video Training Ch 5 - Testing and Commissioning