2201-2204 Steam Trace
2201-2204 Steam Trace
Dekoron/Unitherm Models 2201 through 2204 steam traced tubing bundles are designed to maintain fluid temperature or viscosity in process lines using saturated steam. These products contain single or multiple metal or polymer process tubes and a metal steam tracer tube covered with a heat reflecting foil, moisture resistant, non-wicking, inorganic fibrous glass thermal insulation and a seamless weather protective outer jacket. The tubes are cabled to provide solid contact and consistent heat transfer throughout the bundle length. The cabled tubes are easily bent in any direction. There is no need to twist the bundle to make a bend, a necessity with parallel-tube bundles. The compact, energy efficient design keeps the outer jacket at or below 140°F (60°C) while transporting fluids at temperatures up to 400°F (204°C).
-
Pre-Insulated Tubing for operating temperatures up to 400ºF (204ºC)
2200 Series Fibrous Glass Insulation - Imperial Sizes
2200 Series Fibrous Glass Insulation - Metric Sizes
4200 Series Aerogel Insulation - Imperial Sizes
4200 Series Aerogel Insulation - Metric Sizes
NEW! Stack, Grab & Go pre-packaged Pre-insulated Tubing
-
High Temperature Pre-Insulated Tubing for operating temperatures above 400ºF (204ºC)
-
Heavy Steam Traced Tubing Bundles for operating temperatures to 400ºF (204ºC)
-
Heavy Steam Traced Tubing Bundles for operating temperatures above 400ºF (204ºC)
-
Light Steam Traced Tubing Bundles for operating temperatures up to 400ºF (204ºC)
-
Light Steam Traced Tubing Bundles for operating temperatures above 400ºF (204ºC)
Please register or log in
To have access to the complete information and specs about our products, please register a new account or make sure to log in.
Preview our Technical Bulletins
What tubing material must I use to meet ASTM standards
Stainless Steel Tubing - ASTM A269 or ASTM A213
Can I use thermistors to control temperature
What is the tolerance on Heated Hose length
Can I install Dekoron Unitherm bundles below grade
Common stainless steel grades used in Dekoron Unitherm bundles
What is Dual Certified Stainless Steel
Application and Installation of Dekron Line Sensing Thermostats
What type temperature controller is needed for a bundle with a CPD heater
What CPD heaters are used in Dekoron Unitherm bundles
Polymer Jackets on Dekoron Unitherm Products
Constant Power Density Heating Element
Fittings for Dekoron-Unitherm Bundles
Dekoron Unitherm Video Training Ch 1 - Sealing
Dekoron Unitherm Video Training Ch 2 - Electrical Power Connnection and Termination
Dekoron Unitherm Video Training Ch 3 - Bending Tube Bundles
Dekoron Unitherm Video Training Ch 4 - Routing and Supporting
Dekoron Unitherm Video Training Ch 5 - Testing and Commissioning
English
Arabic
Chinese (Simplified)
Dutch
French
German
Italian
Japanese
Portuguese
Russian
Spanish